Ne pas cliquer
Parrain-Linux
nécessite une connexion Internet pour être utilisé
Écrire un nouveau message
Page : < 1 2
Semplice Login en boucle
Avatar
compte supprimé
utilisateur supprimé
supprimé
Inscrit le : inconnu
Messages : inconnu
Point(s) : 0
Localisation :

Posté le 03/06/2014 à 22:33:03
Citer


Tu n'avait pas une partition /home dédiée ?

Les résultats des commandes précédents ont l'air ok.

Tu peut faire (après un essai de connexion) :
ls -al /home/fred
cat /home/fred/.xsession-errors


Remonter Descendre Permalien du message
Avatar
compte supprimé
utilisateur supprimé
supprimé
Inscrit le : inconnu
Messages : inconnu
Point(s) : 0
Localisation :

Posté le 04/06/2014 à 17:33:30
Citer

Oui la partition /home était bien dédiée, sur le même disque.

J'ai installé Crunchbang (/ + /home) sur la partition qui était auparavant uniquement celle dédiée à / et je n'ai pas touché l'autre partition si ce n'est pour la sauvegarde.

Le résultat des commandes retourné est envoyé depuis "mon" utilisateur, peut etre cela explique t il ta remarque ?

ls -al /home/fred
Code:
total 304
drwxr-xr-x 37 fred fred  4096 juin   4 17:23 .
drwxr-xr-x  3 root root  4096 mai   29 17:56 ..
drwx------  3 fred fred  4096 mai   29 18:39 .adobe
drwxr-xr-x  2 fred fred  4096 mai   29 17:56 backup
-rw-------  1 fred fred  2523 juin   3 17:28 .bash_history
-rw-r--r--  1 fred fred   220 mai   29 17:56 .bash_logout
-rw-r--r--  1 fred fred  3392 mai   29 17:56 .bashrc
-rw-r--r--  1 fred fred  3517 mai   29 21:04 .bashrc.save
drwxr-xr-x  2 fred fred  4096 mai   29 17:56 bin
drwxr-xr-x  2 fred fred  4096 nov.   9  2013 brother
-rw-r--r--  1 fred fred 24434 déc.   4 22:42 brother.tar.gz
-rw-r--r--  1 fred fred 24434 déc.   4 22:42 brother.tar.gz.1
drwxr-xr-x 10 fred fred  4096 juin   4 17:23 .cache
drwxr-xr-x 25 fred fred  4096 juin   3 19:28 .config
-rw-r--r--  1 fred fred  1526 févr. 27  2013 .conkyrc
-rw-r--r--  1 fred fred  2420 mai   29 18:59 .conkyrc.old
drwx------  3 fred fred  4096 mai   29 17:58 .dbus
drwxr-xr-x  2 fred fred  4096 mai   29 17:56 documents
drwxr-xr-x  2 fred fred  4096 mai   30 08:48 .fontconfig
drwxr-xr-x  2 fred fred  4096 mai   29 17:56 .fonts
-rw-r--r--  1 fred fred   730 mai   29 17:56 .fonts.conf
-rw-r--r--  1 fred fred  1256 mai   30 08:50 .galculator
drwx------  3 fred fred  4096 juin   4 17:23 .gconf
drwxr-xr-x 24 fred fred  4096 mai   30 08:48 .gimp-2.8
-rw-r-----  1 fred fred     0 juin   1 18:28 .gksu.lock
-rw-r--r--  1 fred fred   404 mai   29 17:56 .gmrunrc
drwx------  4 fred fred  4096 mai   29 17:58 .gnome2
drwx------  2 fred fred  4096 mai   29 17:58 .gnome2_private
drwxr-xr-x  2 fred fred  4096 mai   29 18:36 .gstreamer-0.10
-rw-------  1 fred fred     0 juin   1 18:28 .gtk-bookmarks
-rw-r--r--  1 fred fred   255 mai   29 17:58 .gtk-bookmarksold
-rw-r--r--  1 fred fred   594 mai   29 18:25 .gtkrc-2.0
-rw-r--r--  1 fred fred     1 mai   29 17:56 .gtkrc-2.0.mine
dr-x------  2 fred fred     0 juin   4 17:23 .gvfs
drwxr-xr-x  4 fred fred  4096 mai   29 19:16 .icedtea
drwxr-xr-x  3 fred fred  4096 mai   29 18:25 .icons
drwxr-xr-x  3 fred fred  4096 mai   29 17:56 images
drwxr-xr-x  3 fred fred  4096 mai   29 17:56 .local
drwx------  3 fred fred  4096 mai   29 18:39 .macromedia
drwxr-xr-x  2 fred fred  4096 mai   29 17:56 modèles
drwx------  4 fred fred  4096 mai   29 18:26 .mozilla
drwxr-xr-x  2 fred fred  4096 mai   29 17:56 musique
-rw-r--r--  1 fred fred    98 mai   29 17:56 .pbuilderrc
drwx------  3 fred fred  4096 mai   29 19:10 .pki
-rw-r--r--  1 fred fred   808 mai   29 17:56 .profile
drwx------  2 fred fred  4096 juin   4 17:23 .pulse
-rw-------  1 fred fred   256 mai   29 17:58 .pulse-cookie
drwxr-xr-x  4 fred fred  4096 mai   29 22:50 .Qarte
drwx------  2 fred fred  4096 mai   29 18:20 .ssh
drwxr-xr-x  2 fred fred  4096 juin   1 23:45 téléchargements
drwxr-xr-x  2 fred fred  4096 mai   29 17:56 .themes
drwx------  3 fred fred  4096 mai   29 18:27 .thumbnails
drwxr-xr-x  2 fred fred  4096 mai   29 17:56 tmp
drwxr-xr-x  2 fred fred  4096 mai   29 17:56 vidéos
drwxr-xr-x  6 fred fred  4096 juin   3 19:28 wuala
-rw-------  1 fred fred    52 juin   4 17:23 .Xauthority
drwxr-xr-x  2 fred fred  4096 mai   29 17:56 .xchat2
-rw-r--r--  1 fred fred  1723 mai   29 17:56 .Xresources
-rw-r--r--  1 fred fred  7470 mai   29 17:56 .xscreensaver
-rw-------  1 fred fred 32186 juin   4 17:25 .xsession-errors

et cat /home/fred/.xsession-errors

Code:
Xsession: X session started for fred at jeudi 29 mai 2014, 17:58:00 (UTC+0200)
localuser:fred being added to access control list
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
/bin/sh: 1: exec: /usr/lib/notification-daemon/notification-daemon: not found
** Message: applet now removed from the notification area
tint2 : nb monitor 1, nb monitor used 1, nb desktop 2
** Message: applet now embedded in the notification area
thunar-volman: Type de périphérique USB non supporté.
/usr/bin/cb-recent-files-pipemenu: cannot find a readable recently-used.xbel file
/usr/bin/cb-recent-files-pipemenu: cannot find a readable recently-used.xbel file

(nitrogen:32615): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `dest_y >= 0 && dest_y + height <= dest_pixbuf->height' failed

(nitrogen:32615): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `dest_y >= 0 && dest_y + height <= dest_pixbuf->height' failed

(nitrogen:32615): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `dest_y >= 0 && dest_y + height <= dest_pixbuf->height' failed

(nitrogen:32615): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `dest_y >= 0 && dest_y + height <= dest_pixbuf->height' failed

(nitrogen:32615): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `dest_y >= 0 && dest_y + height <= dest_pixbuf->height' failed

(nitrogen:32615): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `dest_y >= 0 && dest_y + height <= dest_pixbuf->height' failed

(nitrogen:32615): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `dest_y >= 0 && dest_y + height <= dest_pixbuf->height' failed

(nitrogen:32615): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `dest_y >= 0 && dest_y + height <= dest_pixbuf->height' failed

(gksudo:32648): GLib-CRITICAL **: g_str_has_prefix: assertion `str != NULL' failed

(gksudo:32721): GLib-CRITICAL **: g_str_has_prefix: assertion `str != NULL' failed
/usr/bin/cb-recent-files-pipemenu: cannot find a readable recently-used.xbel file

(gksudo:32741): GLib-CRITICAL **: g_str_has_prefix: assertion `str != NULL' failed
method return sender=:1.10 -> dest=:1.42 reply_serial=2
xscreensaver: 18:35:43: SIGHUP received: restarting...
xscreensaver: 18:35:43: running as fred/fred (1000/1000)

XIO:  fatal IO error 4 (Appel système interrompu) on X server ":0.0"
      after 6166 requests (6166 known processed) with 0 events remaining.
real transparency on... depth: 32
xRandr: Found crtc's: 2
xRandr: Linking output VGA-0 with crtc 0
XIO:  fatal IO error 11 (Ressource temporairement non disponible) on X server ":0.0"
      after 110282 requests (110279 known processed) with 0 events remaining.
xscreensaver: 18:35:44: Can't open display: :0.0
xscreensaver: 18:35:44: running as fred/fred (1000/1000)

xscreensaver: 18:35:44: Errors at startup are usually authorization problems.
              But you're not logging in as root (good!) so something
              else must be wrong.  Did you read the manual and the FAQ?

              http://www.jwz.org/xscreensaver/faq.html
              http://www.jwz.org/xscreensaver/man.html

Xsession: X session started for fred at jeudi 29 mai 2014, 18:36:35 (UTC+0200)
localuser:fred being added to access control list
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
/bin/sh: 1: exec: /usr/lib/notification-daemon/notification-daemon: not found
** Message: applet now removed from the notification area

(nitrogen:2586): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `dest_y >= 0 && dest_y + height <= dest_pixbuf->height' failed
tint2 : nb monitor 1, nb monitor used 1, nb desktop 2
** Message: applet now embedded in the notification area
/usr/bin/cb-recent-files-pipemenu: cannot find a readable recently-used.xbel file
/usr/bin/cb-recent-files-pipemenu: cannot find a readable recently-used.xbel file
/usr/bin/cb-recent-files-pipemenu: cannot find a readable recently-used.xbel file
/usr/bin/cb-recent-files-pipemenu: cannot find a readable recently-used.xbel file

** (terminator:3343): WARNING **: Binding '<Shift><Control>a' failed!
Unable to bind hide_window key, another instance/window has it.
java version "1.6.0_31"
OpenJDK Runtime Environment (IcedTea6 1.13.3) (6b31-1.13.3-1~deb7u1)
OpenJDK 64-Bit Server VM (build 23.25-b01, mixed mode)
NOTE: child process received `Goodbye', closing down
NOTE: child process received `Goodbye', closing down
Clipboard is null, recovering ...
Clipboard is null, recovering ...
method return sender=:1.18 -> dest=:1.39 reply_serial=2
xscreensaver: 19:21:54: SIGHUP received: restarting...
xscreensaver: 19:21:54: running as fred/fred (1000/1000)

XIO:  fatal IO error 11 (Ressource temporairement non disponible) on X server ":0.0"
      after 235815 requests (235812 known processed) with 0 events remaining.
XIO:  fatal IO error 4 (Appel système interrompu) on X server ":0.0"
      after 12357 requests (12357 known processed) with 0 events remaining.
real transparency on... depth: 32
xRandr: Found crtc's: 2
xRandr: Linking output VGA-0 with crtc 0
xscreensaver: 19:21:54: Can't open display: :0.0
xscreensaver: 19:21:54: running as fred/fred (1000/1000)

xscreensaver: 19:21:54: Errors at startup are usually authorization problems.
              But you're not logging in as root (good!) so something
              else must be wrong.  Did you read the manual and the FAQ?

              http://www.jwz.org/xscreensaver/faq.html
              http://www.jwz.org/xscreensaver/man.html

Xsession: X session started for fred at jeudi 29 mai 2014, 19:22:39 (UTC+0200)
localuser:fred being added to access control list
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
/bin/sh: 1: exec: /usr/lib/notification-daemon/notification-daemon: not found

(nitrogen:2501): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `dest_y >= 0 && dest_y + height <= dest_pixbuf->height' failed
** Message: applet now removed from the notification area
tint2 : nb monitor 1, nb monitor used 1, nb desktop 2
** Message: applet now embedded in the notification area

** (clipit:2494): WARNING **: Binding '<Ctrl><Alt>A' failed!

NOTE: child process received `Goodbye', closing down

** (terminator:3259): WARNING **: Binding '<Shift><Control>a' failed!
Unable to bind hide_window key, another instance/window has it.
NOTE: child process received `Goodbye', closing down
NOTE: child process received `Goodbye', closing down

(x-www-browser:2880): Gtk-CRITICAL **: IA__gtk_clipboard_set_with_data: assertion `targets != NULL' failed

** (terminator:4705): WARNING **: Binding '<Shift><Control>a' failed!
Unable to bind hide_window key, another instance/window has it.
22:49:29: WARNING - utils Config file read error: [Errno 2] Aucun fichier ou dossier de ce type: '/home/fred/.Qarte/config.cfg' using default.

Exit Qarte, Check downloading...      OK
  close updating thread...      OK
  Save config file... OK
  ...Quiet close.
[0x1a39108] main libvlc: Lancement de vlc avec l'interface par défaut. Utilisez « cvlc » pour démarrer VLC sans interface.
[flv @ 0x1a8e1c0] Estimating duration from bitrate, this may be inaccurate
[flv @ 0x1aea660] Estimating duration from bitrate, this may be inaccurate
[0x1c6b108] main libvlc: Lancement de vlc avec l'interface par défaut. Utilisez « cvlc » pour démarrer VLC sans interface.
[0x2293108] main libvlc: Lancement de vlc avec l'interface par défaut. Utilisez « cvlc » pour démarrer VLC sans interface.
[mpeg4 @ 0x7fd3ac05a940] Invalid and inefficient vfw-avi packed B frames detected

(thunar:2490): Gtk-CRITICAL **: IA__gtk_drag_source_set_icon_name: assertion `icon_name != NULL' failed
[0xe1a108] main libvlc: Lancement de vlc avec l'interface par défaut. Utilisez « cvlc » pour démarrer VLC sans interface.
[0x1667108] main libvlc: Lancement de vlc avec l'interface par défaut. Utilisez « cvlc » pour démarrer VLC sans interface.
NOTE: child process received `Goodbye', closing down
NOTE: child process received `Goodbye', closing down

(x-www-browser:2880): Gtk-CRITICAL **: IA__gtk_clipboard_get_for_display: assertion `!display->closed' failed

(x-www-browser:2880): Gtk-CRITICAL **: IA__gtk_clipboard_get_for_display: assertion `!display->closed' failed

(x-www-browser:2880): Gtk-CRITICAL **: IA__gtk_clipboard_get_for_display: assertion `!display->closed' failed

(x-www-browser:2880): Gtk-CRITICAL **: IA__gtk_clipboard_get_for_display: assertion `!display->closed' failed
Clipboard is null, recovering ...
method return sender=:1.11 -> dest=:1.42 reply_serial=2
XIO:  fatal IO error 11 (Ressource temporairement non disponible) on X server ":0.0"
      after 380223 requests (380220 known processed) with 0 events remaining.
xscreensaver: 23:38:43: SIGHUP received: restarting...
xscreensaver: 23:38:43: running as fred/fred (1000/1000)

XIO:  fatal IO error 4 (Appel système interrompu) on X server ":0.0"
      after 38588 requests (38588 known processed) with 0 events remaining.
real transparency on... depth: 32
xRandr: Found crtc's: 2
xRandr: Linking output VGA-0 with crtc 0
xscreensaver: 23:38:43: Can't open display: :0.0
xscreensaver: 23:38:43: running as fred/fred (1000/1000)

xscreensaver: 23:38:43: Errors at startup are usually authorization problems.
              But you're not logging in as root (good!) so something
              else must be wrong.  Did you read the manual and the FAQ?

              http://www.jwz.org/xscreensaver/faq.html
              http://www.jwz.org/xscreensaver/man.html

Xsession: X session started for fred at vendredi 30 mai 2014, 08:38:48 (UTC+0200)
localuser:fred being added to access control list
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
/bin/sh: 1: exec: /usr/lib/notification-daemon/notification-daemon: not found

(nitrogen:2571): GdkPixbuf-CRITICAL **: gdk_pixbuf_copy_area: assertion `dest_y >= 0 && dest_y + height <= dest_pixbuf->height' failed
** Message: applet now removed from the notification area
tint2 : nb monitor 1, nb monitor used 1, nb desktop 2
** Message: applet now embedded in the notification area

** (clipit:2576): WARNING **: Binding '<Ctrl><Alt>A' failed!

NOTE: child process received `Goodbye', closing down
/usr/bin/catfish: ligne 2 : fg: pas de contrôle de tâche
/usr/bin/catfish: ligne 2 : fg: pas de contrôle de tâche
/usr/bin/catfish: ligne 2 : fg: pas de contrôle de tâche

** (viewnior:3418): WARNING **: Loading config file: Aucun fichier ou dossier de ce type. All preferences are set to their default values. Saving ...

(process:3419): GLib-WARNING **: /tmp/buildd/glib2.0-2.33.12+really2.32.4/./glib/goption.c:2179: ignoring no-arg, optional-arg or filename flags (8) on option of arg-type 0 in entry (null):version

(process:3419): GLib-WARNING **: /tmp/buildd/glib2.0-2.33.12+really2.32.4/./glib/goption.c:2179: ignoring no-arg, optional-arg or filename flags (8) on option of arg-type 0 in entry (null):main
** Message: No existing settings file, using default settings
** Message: Using UDEV

** (xfburn:3419): WARNING **: reported speed list is empty for device:

** (xfburn:3419): WARNING **: HL-DT-ST RW/DVD GCC-H30N  can burn: 1 [cdr: 1, cdrw: 1, dvdr: 0, dvdram: 0]
** Message: Using Transcodeur GStreamer transcoder.
[galculator] fichier de configuration: impossible d'ouvrir le fichier de configuration /home/fred/.galculator en lecture. Ignorez ce message si vous lancez galculator pour la première fois. Utilisation des paramètrespar défauts.

(galculator:3429): GLib-GObject-CRITICAL **: g_object_ref: assertion `G_IS_OBJECT (object)' failed

(galculator:3429): Gdk-CRITICAL **: IA__gdk_window_set_icon_list: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(galculator:3429): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_width: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(galculator:3429): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_height: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(galculator:3429): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
[0x1651108] main libvlc: Lancement de vlc avec l'interface par défaut. Utilisez « cvlc » pour démarrer VLC sans interface.

(iceweasel:2842): Gtk-CRITICAL **: IA__gtk_text_buffer_get_insert: assertion `GTK_IS_TEXT_BUFFER (buffer)' failed

(iceweasel:2842): Gtk-CRITICAL **: IA__gtk_text_buffer_get_iter_at_mark: assertion `GTK_IS_TEXT_MARK (mark)' failed

(iceweasel:2842): Gtk-CRITICAL **: _gtk_text_layout_get_block_cursor: assertion `layout != NULL' failed

(iceweasel:2842): Gtk-CRITICAL **: IA__gtk_text_layout_get_cursor_locations: assertion `layout != NULL' failed

(iceweasel:2842): Gdk-CRITICAL **: gdk_window_invalidate_rect_full: assertion `GDK_IS_WINDOW (window)' failed

(iceweasel:2842): Gdk-CRITICAL **: gdk_window_invalidate_rect_full: assertion `GDK_IS_WINDOW (window)' failed

(iceweasel:2842): Gtk-CRITICAL **: IA__gtk_text_buffer_get_insert: assertion `GTK_IS_TEXT_BUFFER (buffer)' failed

(iceweasel:2842): Gtk-CRITICAL **: IA__gtk_text_buffer_get_iter_at_mark: assertion `GTK_IS_TEXT_MARK (mark)' failed

(iceweasel:2842): Gtk-CRITICAL **: _gtk_text_layout_get_block_cursor: assertion `layout != NULL' failed

(iceweasel:2842): Gtk-CRITICAL **: IA__gtk_text_layout_get_cursor_locations: assertion `layout != NULL' failed

(iceweasel:2842): Gdk-CRITICAL **: gdk_window_invalidate_rect_full: assertion `GDK_IS_WINDOW (window)' failed

(iceweasel:2842): Gdk-CRITICAL **: gdk_window_invalidate_rect_full: assertion `GDK_IS_WINDOW (window)' failed
NOTE: child process received `Goodbye', closing down

(iceweasel:2842): Gtk-CRITICAL **: IA__gtk_clipboard_get_for_display: assertion `!display->closed' failed

(iceweasel:2842): Gtk-CRITICAL **: IA__gtk_clipboard_get_for_display: assertion `!display->closed' failed

(iceweasel:2842): Gtk-CRITICAL **: IA__gtk_clipboard_get_for_display: assertion `!display->closed' failed

(iceweasel:2842): Gtk-CRITICAL **: IA__gtk_clipboard_get_for_display: assertion `!display->closed' failed
Clipboard is null, recovering ...
thunar: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.0.
XIO:  fatal IO error 11 (Ressource temporairement non disponible) on X server ":0.0"
      after 44605 requests (44603 known processed) with 0 events remaining.

(nm-applet:2597): Gdk-WARNING **: GdkWindow 0x1c0000e unexpectedly destroyed
** Message: applet now removed from the notification area

(clipit:2576): Gdk-WARNING **: GdkWindow 0x2400039 unexpectedly destroyed

(pnmixer:2566): Gdk-WARNING **: GdkWindow 0x200002c unexpectedly destroyed
cb-exit: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.0.
real transparency on... depth: 32
xRandr: Found crtc's: 2
xRandr: Linking output VGA-0 with crtc 0
clipit: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.0.

(nm-applet:2597): Gdk-WARNING **: The program 'nm-applet' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadWindow (invalid Window parameter)'.
  (Details: serial 323 error_code 3 request_code 18 minor_code 0)
  (Note to programmers: normally, X errors are reported asynchronously;
   that is, you will receive the error a while after causing it.
   To debug your program, run it with the GDK_SYNCHRONIZE environment
   variable to change this behavior. You can then get a meaningful
   backtrace from your debugger if you break on the gdk_x_error() function.)

pnmixer: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.0.
system-config-printer-applet: Fatal IO error 11 (Ressource temporairement non disponible) on X server :0.0.
XIO:  fatal IO error 11 (Ressource temporairement non disponible) on X server ":0.0"
      after 3640108 requests (3640102 known processed) with 0 events remaining.
[ 41002.23 ] error 3 (BadWindow) request 2 minor 0 serial 1885615
[ 41002.23 ] error 3 (BadWindow) request 139 minor 6 serial 1885616
[ 41002.23 ] error 3 (BadWindow) request 139 minor 5 serial 1885617
[ 41002.23 ] error 3 (BadWindow) request 20 minor 0 serial 1885618
[ 41002.23 ] error 3 (BadWindow) request 20 minor 0 serial 1885619
[ 41002.23 ] error 3 (BadWindow) request 20 minor 0 serial 1885620
[ 41002.23 ] error 3 (BadWindow) request 20 minor 0 serial 1885621
[ 42959.68 ] error 9 (BadDrawable) request 149 minor 4 serial 2566473
[ 42959.68 ] error 163 (BadPicture) request 149 minor 8 serial 2566532
[ 42959.69 ] error 4 (BadPixmap) request 54 minor 0 serial 2566550
[ 42959.69 ] error 163 (BadPicture) request 149 minor 7 serial 2566551
Xsession: X session started for fred at vendredi 30 mai 2014, 22:31:58 (UTC+0200)
localuser:fred being added to access control list
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
/bin/sh: 1: exec: /usr/lib/notification-daemon/notification-daemon: not found
** Message: applet now removed from the notification area
tint2 : nb monitor 1, nb monitor used 1, nb desktop 2
** Message: applet now embedded in the notification area
method return sender=:1.12 -> dest=:1.57 reply_serial=2
xscreensaver: 22:32:18: SIGHUP received: restarting...
xscreensaver: 22:32:18: running as fred/fred (1000/1000)

XIO:  fatal IO error 11 (Ressource temporairement non disponible) on X server ":0.0"
      after 5531 requests (5531 known processed) with 0 events remaining.
XIO:  fatal IO error 4 (Appel système interrompu) on X server ":0.0"
      after 492 requests (492 known processed) with 0 events remaining.
real transparency on... depth: 32
xRandr: Found crtc's: 2
xRandr: Linking output VGA-0 with crtc 0
xscreensaver: 22:32:19: Can't open display: :0.0
xscreensaver: 22:32:19: running as fred/fred (1000/1000)

xscreensaver: 22:32:19: Errors at startup are usually authorization problems.
              But you're not logging in as root (good!) so something
              else must be wrong.  Did you read the manual and the FAQ?

              http://www.jwz.org/xscreensaver/faq.html
              http://www.jwz.org/xscreensaver/man.html

Xsession: X session started for fred at samedi 31 mai 2014, 09:51:31 (UTC+0200)
localuser:fred being added to access control list
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
/bin/sh: 1: exec: /usr/lib/notification-daemon/notification-daemon: not found
WARNING: gnome-keyring:: couldn't connect to: /home/fred/.cache/keyring-7Gh5qg/pkcs11: No such file or directory
** Message: applet now removed from the notification area
tint2 : nb monitor 1, nb monitor used 1, nb desktop 2
** Message: applet now embedded in the notification area

** (clipit:2518): WARNING **: Binding '<Ctrl><Alt>A' failed!

NOTE: child process received `Goodbye', closing down
method return sender=:1.11 -> dest=:1.39 reply_serial=2
xscreensaver: 23:23:51: SIGHUP received: restarting...
xscreensaver: 23:23:51: running as fred/fred (1000/1000)

XIO:  fatal IO error 11 (Ressource temporairement non disponible) on X server ":0.0"
      after 28523 requests (28520 known processed) with 0 events remaining.
XIO:  fatal IO error 4 (Appel système interrompu) on X server ":0.0"
      after 21389 requests (21389 known processed) with 0 events remaining.
real transparency on... depth: 32
xRandr: Found crtc's: 2
xRandr: Linking output VGA-0 with crtc 0
xscreensaver: 23:23:52: Can't open display: :0.0
xscreensaver: 23:23:52: running as fred/fred (1000/1000)

xscreensaver: 23:23:52: Errors at startup are usually authorization problems.
              But you're not logging in as root (good!) so something
              else must be wrong.  Did you read the manual and the FAQ?

              http://www.jwz.org/xscreensaver/faq.html
              http://www.jwz.org/xscreensaver/man.html

Xsession: X session started for fred at dimanche 1 juin 2014, 09:04:22 (UTC+0200)
localuser:fred being added to access control list
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
/bin/sh: 1: exec: /usr/lib/notification-daemon/notification-daemon: not found
** Message: applet now removed from the notification area
tint2 : nb monitor 1, nb monitor used 1, nb desktop 2
** Message: applet now embedded in the notification area

** (clipit:2498): WARNING **: Binding '<Ctrl><Alt>A' failed!


(process:3643): GLib-WARNING **: /tmp/buildd/glib2.0-2.33.12+really2.32.4/./glib/goption.c:2179: ignoring no-arg, optional-arg or filename flags (8) on option of arg-type 0 in entry (null):version

(process:3643): GLib-WARNING **: /tmp/buildd/glib2.0-2.33.12+really2.32.4/./glib/goption.c:2179: ignoring no-arg, optional-arg or filename flags (8) on option of arg-type 0 in entry (null):main
** Message: Using UDEV

** (xfburn:3643): WARNING **: reported speed list is empty for device:

** (xfburn:3643): WARNING **: HL-DT-ST RW/DVD GCC-H30N  can burn: 1 [cdr: 1, cdrw: 1, dvdr: 0, dvdram: 0]
** Message: Using Transcodeur GStreamer transcoder.

(process:3760): GLib-WARNING **: /tmp/buildd/glib2.0-2.33.12+really2.32.4/./glib/goption.c:2179: ignoring no-arg, optional-arg or filename flags (8) on option of arg-type 0 in entry (null):version

(process:3760): GLib-WARNING **: /tmp/buildd/glib2.0-2.33.12+really2.32.4/./glib/goption.c:2179: ignoring no-arg, optional-arg or filename flags (8) on option of arg-type 0 in entry (null):main
** Message: Using UDEV
** Message: Unmounted 'puppy_precise_5.7.1'
** Message: Using Transcodeur GStreamer transcoder.

** (xfburn:3760): WARNING **: reported speed list is empty for device:

** (xfburn:3760): WARNING **: HL-DT-ST RW/DVD GCC-H30N  can burn: 1 [cdr: 1, cdrw: 1, dvdr: 0, dvdram: 0]
thunar-volman: La gravure automatique des CDs et DVDs vierges a été désactivée.

(process:3793): GLib-WARNING **: /tmp/buildd/glib2.0-2.33.12+really2.32.4/./glib/goption.c:2179: ignoring no-arg, optional-arg or filename flags (8) on option of arg-type 0 in entry (null):version

(process:3793): GLib-WARNING **: /tmp/buildd/glib2.0-2.33.12+really2.32.4/./glib/goption.c:2179: ignoring no-arg, optional-arg or filename flags (8) on option of arg-type 0 in entry (null):main
** Message: Using UDEV
** Message: Using Transcodeur GStreamer transcoder.
======================
libparted : 2.3
======================
thunar-volman: Daemon is inhibited.
thunar-volman: Type de périphérique USB non supporté.
thunar-volman: Type de périphérique USB non supporté.
thunar-volman: Type de périphérique bloc inconnu.

(thunar:2492): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
Clipboard is null, recovering ...

(thunar:4453): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed

(thunar:4453): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed

(thunar:4453): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
NOTE: child process received `Goodbye', closing down
method return sender=:1.11 -> dest=:1.44 reply_serial=2
XIO:  fatal IO error 4 (Appel système interrompu) on X server ":0.0"
      after 242419 requests (242419 known processed) with 0 events remaining.
xscreensaver: 22:14:37: SIGHUP received: restarting...
xscreensaver: 22:14:37: running as fred/fred (1000/1000)

XIO:  fatal IO error 4 (Appel système interrompu) on X server ":0.0"
      after 45637 requests (45637 known processed) with 0 events remaining.
real transparency on... depth: 32
xRandr: Found crtc's: 2
xRandr: Linking output VGA-0 with crtc 0
xscreensaver: 22:14:39: Can't open display: :0.0
xscreensaver: 22:14:39: running as fred/fred (1000/1000)

xscreensaver: 22:14:39: Errors at startup are usually authorization problems.
              But you're not logging in as root (good!) so something
              else must be wrong.  Did you read the manual and the FAQ?

              http://www.jwz.org/xscreensaver/faq.html
              http://www.jwz.org/xscreensaver/man.html

Xsession: X session started for fred at dimanche 1 juin 2014, 23:02:02 (UTC+0200)
localuser:fred being added to access control list
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
/bin/sh: 1: exec: /usr/lib/notification-daemon/notification-daemon: not found
** Message: applet now removed from the notification area
tint2 : nb monitor 1, nb monitor used 1, nb desktop 2
** Message: applet now embedded in the notification area

** (clipit:2526): WARNING **: Binding '<Ctrl><Alt>A' failed!

NOTE: child process received `Goodbye', closing down
NOTE: child process received `Goodbye', closing down
NOTE: child process received `Goodbye', closing down
NOTE: child process received `Goodbye', closing down
method return sender=:1.11 -> dest=:1.40 reply_serial=2
xscreensaver: 23:48:19: SIGHUP received: restarting...
xscreensaver: 23:48:19: running as fred/fred (1000/1000)

XIO:  fatal IO error 11 (Ressource temporairement non disponible) on X server ":0.0"
      after 35666 requests (35663 known processed) with 0 events remaining.
XIO:  fatal IO error 4 (Appel système interrompu) on X server ":0.0"
      after 5594 requests (5594 known processed) with 0 events remaining.
real transparency on... depth: 32
xRandr: Found crtc's: 2
xRandr: Linking output VGA-0 with crtc 0
xscreensaver: 23:48:19: Can't open display: :0.0
xscreensaver: 23:48:19: running as fred/fred (1000/1000)

xscreensaver: 23:48:19: Errors at startup are usually authorization problems.
              But you're not logging in as root (good!) so something
              else must be wrong.  Did you read the manual and the FAQ?

              http://www.jwz.org/xscreensaver/faq.html
              http://www.jwz.org/xscreensaver/man.html

Xsession: X session started for fred at lundi 2 juin 2014, 17:58:56 (UTC+0200)
localuser:fred being added to access control list
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
WARNING: gnome-keyring:: couldn't connect to: /home/fred/.cache/keyring-cbgxKw/pkcs11: No such file or directory
/bin/sh: 1: exec: /usr/lib/notification-daemon/notification-daemon: not found
** Message: applet now removed from the notification area
tint2 : nb monitor 1, nb monitor used 1, nb desktop 2
** Message: applet now embedded in the notification area

** (clipit:2494): WARNING **: Binding '<Ctrl><Alt>A' failed!

NOTE: child process received `Goodbye', closing down
NOTE: child process received `Goodbye', closing down
NOTE: child process received `Goodbye', closing down
NOTE: child process received `Goodbye', closing down
Clipboard is null, recovering ...
method return sender=:1.12 -> dest=:1.37 reply_serial=2
** Message: applet now removed from the notification area
** Message: NM disappeared
xscreensaver: 21:43:46: SIGHUP received: restarting...
xscreensaver: 21:43:46: running as fred/fred (1000/1000)

XIO:  fatal IO error 11 (Ressource temporairement non disponible) on X server ":0.0"
      after 65199 requests (65199 known processed) with 0 events remaining.
XIO:  fatal IO error 4 (Appel système interrompu) on X server ":0.0"
      after 14741 requests (14741 known processed) with 0 events remaining.
real transparency on... depth: 32
xRandr: Found crtc's: 2
xRandr: Linking output VGA-0 with crtc 0
xscreensaver: 21:43:47: Can't open display: :0.0
xscreensaver: 21:43:47: running as fred/fred (1000/1000)

xscreensaver: 21:43:47: Errors at startup are usually authorization problems.
              But you're not logging in as root (good!) so something
              else must be wrong.  Did you read the manual and the FAQ?

              http://www.jwz.org/xscreensaver/faq.html
              http://www.jwz.org/xscreensaver/man.html

Xsession: X session started for fred at mardi 3 juin 2014, 07:20:38 (UTC+0200)
localuser:fred being added to access control list
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
WARNING: gnome-keyring:: couldn't connect to: /home/fred/.cache/keyring-yk3bDl/pkcs11: No such file or directory
/bin/sh: 1: exec: /usr/lib/notification-daemon/notification-daemon: not found
** Message: applet now removed from the notification area
tint2 : nb monitor 1, nb monitor used 1, nb desktop 2
** Message: applet now embedded in the notification area

** (clipit:2526): WARNING **: Binding '<Ctrl><Alt>A' failed!

Clipboard is null, recovering ...
ALSA lib pcm_dsnoop.c:612:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dsnoop.c:612:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dsnoop.c:612:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dsnoop.c:612:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm_dsnoop.c:612:(snd_pcm_dsnoop_open) unable to open slave
ALSA lib pcm.c:7420:(snd_pcm_set_params) Channels count (1) not available for CAPTURE: Argument invalide
ALSA lib pcm.c:7420:(snd_pcm_set_params) Channels count (1) not available for CAPTURE: Argument invalide
ALSA lib pcm.c:7396:(snd_pcm_set_params) Broken configuration for CAPTURE: no configurations available
ALSA lib pcm.c:7396:(snd_pcm_set_params) Broken configuration for CAPTURE: no configurations available
ALSA lib pcm.c:7396:(snd_pcm_set_params) Broken configuration for CAPTURE: no configurations available
ALSA lib pcm.c:7396:(snd_pcm_set_params) Broken configuration for CAPTURE: no configurations available
ALSA lib pcm.c:7396:(snd_pcm_set_params) Broken configuration for CAPTURE: no configurations available
ALSA lib pcm.c:7396:(snd_pcm_set_params) Broken configuration for CAPTURE: no configurations available
ALSA lib pcm.c:7396:(snd_pcm_set_params) Broken configuration for CAPTURE: no configurations available
ALSA lib pcm.c:7396:(snd_pcm_set_params) Broken configuration for CAPTURE: no configurations available
ALSA lib pcm.c:7396:(snd_pcm_set_params) Broken configuration for CAPTURE: no configurations available
ALSA lib pcm.c:7396:(snd_pcm_set_params) Broken configuration for CAPTURE: no configurations available
ALSA lib pcm.c:7396:(snd_pcm_set_params) Broken configuration for CAPTURE: no configurations available
ALSA lib pcm.c:7396:(snd_pcm_set_params) Broken configuration for CAPTURE: no configurations available
ALSA lib pcm.c:7420:(snd_pcm_set_params) Channels count (1) not available for CAPTURE: Argument invalide
ALSA lib pcm.c:7420:(snd_pcm_set_params) Channels count (1) not available for CAPTURE: Argument invalide
java version "1.6.0_31"
OpenJDK Runtime Environment (IcedTea6 1.13.3) (6b31-1.13.3-1~deb7u1)
OpenJDK 64-Bit Server VM (build 23.25-b01, mixed mode)
NOTE: child process received `Goodbye', closing down
NOTE: child process received `Goodbye', closing down
method return sender=:1.11 -> dest=:1.39 reply_serial=2
XIO:  fatal IO error 11 (Ressource temporairement non disponible) on X server ":0.0"
      after 180874 requests (180874 known processed) with 0 events remaining.
xscreensaver: 21:27:35: SIGHUP received: restarting...
xscreensaver: 21:27:35: running as fred/fred (1000/1000)

XIO:  fatal IO error 4 (Appel système interrompu) on X server ":0.0"
      after 42912 requests (42912 known processed) with 0 events remaining.
real transparency on... depth: 32
xRandr: Found crtc's: 2
xRandr: Linking output VGA-0 with crtc 0
xscreensaver: 21:27:35: Can't open display: :0.0
xscreensaver: 21:27:35: running as fred/fred (1000/1000)

xscreensaver: 21:27:35: Errors at startup are usually authorization problems.
              But you're not logging in as root (good!) so something
              else must be wrong.  Did you read the manual and the FAQ?

              http://www.jwz.org/xscreensaver/faq.html
              http://www.jwz.org/xscreensaver/man.html

Xsession: X session started for fred at mercredi 4 juin 2014, 17:23:25 (UTC+0200)
localuser:fred being added to access control list
gnome-keyring-daemon: insufficient process capabilities, unsecure memory might get used
/bin/sh: 1: exec: /usr/lib/notification-daemon/notification-daemon: not found
** Message: applet now removed from the notification area
tint2 : nb monitor 1, nb monitor used 1, nb desktop 2
** Message: applet now embedded in the notification area

** (clipit:2570): WARNING **: Binding '<Ctrl><Alt>A' failed!

Remonter Descendre Permalien du message
Avatar
compte supprimé
utilisateur supprimé
supprimé
Inscrit le : inconnu
Messages : inconnu
Point(s) : 0
Localisation :

Posté le 04/06/2014 à 21:23:54
Citer

Bon, j'ai l'impression qu'il est temps de reinstaller le système et de restaurer après formatage les documents de la partition /home. Il faut bien avouer que je suis un peu déçu car je pensai pouvoir la récupérer.

Quels sont vos conseils pour réaliser une installation facilement récupérable, et ce, même si je suis amené à changer de système / Debian, Buntu's ... ?

Remonter Descendre Permalien du message
Avatar
Tekkharibo
utilisateur
Parrain
Inscrit le : 29/10/2013
Messages : 240
Point(s) : 3987
Distribution : Debian ArchLinux
Localisation :
Albi, Tarn, France
Posté le 04/06/2014 à 23:05:05
Citer

faire un /home sur une partiton differente pour facilement partager et c'est aussi une sauvegarde et la prtition pour l'install pas plus de 20go

Dernière édition le 04/06/2014 à 23:08:12
_________________
HP EliteBook 8560p i7 2.8Ghz Ubuntu 20.04
RPi 4 2Go raspbian Domoticz
RPi 2 Octopi et Anet A8
Souris: RAT 7
Clavier: KBTalking Pure PRO 60% Black/Green

Mon Twitter
Mon hébergeur : 
PlanetHoster

Tu es nouveau et tu n'as pas encore fait ta présentation, va la faire on aime bien savoir des choses sur toi comme ou tu viens pourquoi tu es venu sur PL et sur Linux bien sur ;)

Pas de support par MP

Il me manque des accents quand je te réponds ? C'est juste que je suis en QWERTY et que je suis pas passé en US international #flemme
http://www.parrain-linux.com/promotion.php?image=PL-user.png&membre=tekkharibo
Remonter Descendre Permalien du message
Écrire un nouveau message
Page : < 1 2
Page générée en 0.1369 seconde(s).